- Always measure filament diameter!
- Use at least 3 solid infill layers when printing with Infill <=30% to get a closed surface finish.
- Printing thin wall parts can leave residue on the part when doing travel moves without retraction. It is recommended to deactivate "Only retract when crossing open spaces" in such cases.
Layerheight
General
<= 80% nozzle diameter
Max values for nozzle diameters
Nozzle | 80% |
|---|---|
| 0,25 | 0,2 |
| 0,3 | 0,24 |
0,35 | 0,4375 |
| 0,4 | 0,32 |
| 0,5 | 0,4 |
| 0,6 | 0,48 |
| 0,8 | 0,64 |
| 1,0 | 0,8 |
| 1,2 | 0,96 |